Gas Engine Tools

Gas Engine Tools
Specialty tools for VW®/Audi® gas engines.
Grid | List (1 to 14 of 14) « Prev | Next »
SubE Part MNDH19 - 19 mm 12 Point Socket, Impact Grade

SubE Part MNDH19 - 19 mm 12 Point Socket, Impact Grade

This is the best method to rotate the engine during a TB job.
$7.00
SubH MN3242 - V6 & V8 Crank Locking Pin

SubH MN3242 - V6 & V8 Crank Locking Pin

Crank locking pin for installing the timing belt on some V6 VW®/Audi®cars with 2 valve V6 and 5 valve engines and the 4.2 liter V8.
$15.00
SubH MN3268 - VR6® Cam Locking Plate (12 valve only)

SubH MN3268 - VR6® Cam Locking Plate (12 valve only)

Precision machined to lock the cams at TDC. VR6® engines with 12 valves only.
$28.00
SubH MN3277 - VR6 Spark Plug Boot Puller

SubH MN3277 - VR6 Spark Plug Boot Puller

This specialty tool is for removing spark plug boots on all VW®/Audi® VR6 engines. Replaces VW® tools 3277 and T10029.
$39.00
SubH Part 3366 - Chain Tensioner Gasket Tool

SubH Part 3366 - Chain Tensioner Gasket Tool

The most efficient way to change the troublesome cam adjuster seal on Audi® and Volkswagen® 4, 6 (2.7 and 2.8) and 8 Cyl With 5 Valve per Cylinder.
$25.00
SubH Part MN2122 - Specialty Double 21 & 22 mm Strut Nut Sockets

SubH Part MN2122 - Specialty Double 21 & 22 mm Strut Nut Sockets

This tool spreads and holds the lower strut clamp open when removing the front struts starting with the MK4 (~1999) Golf®, Jetta® and New Beetle®.
$50.00
SubH Part MN2222 - 2-Arm Sprocket Puller

SubH Part MN2222 - 2-Arm Sprocket Puller

2-arm Puller for V6 Gas TB changes but not TDI. Utilized for on TDIs and earlier diesels for special procedures only.
$59.00
SubH Part MN4057 - Oil Filter Housing Drain Tube (T40057)

SubH Part MN4057 - Oil Filter Housing Drain Tube (T40057)

This special drain tool is used to drain the black plastic oil filter housings on cars with the engines including 2.0T and 2.5 liter gas.
$35.00
SubH Part MNSH36 - 36 mm Oil Filter Socket

SubH Part MNSH36 - 36 mm Oil Filter Socket

Compact socket used when removing the black plastic oil filter housing (sump bowl) on vehicles with 2.0T and 2.5L gas engines. Replaces older tool number MN393400.
$10.00
SubH Part MNT297 - Rear Main Seal Installation Guide Tool

SubH Part MNT297 - Rear Main Seal Installation Guide Tool

Protects the delicate rear main oil seals when installing on many 2.0 TSI engines.
$30.00
SubH Part MNT30L - Intake Manifold T30 Bit

SubH Part MNT30L - Intake Manifold T30 Bit

This extended T30 start bit socket is used to remove some hard to reach intake manifold screws on MK5/MK6 2.0T gas engines.
$9.00
SubH Part MNT68A - Cam Locking Bar for 24 Valve VR6® T10068A

SubH Part MNT68A - Cam Locking Bar for 24 Valve VR6® T10068A

Precision machined to lock the cams at TDC. VR6® engines with 24 valves only.
$30.00
SubJ Part MN3078 - Specialty Slotted Strut Nut Sockets

SubJ Part MN3078 - Specialty Slotted Strut Nut Sockets

This specialty drive bit is used with your 7/8" or 22 mm socket or box wrench to remove the slotted nuts found on MK1 (MKI) and some MK2 (MKII) struts.
$19.00
SubK MN3312 - Flat Wrench for Viscous Fan Clutch

SubK MN3312 - Flat Wrench for Viscous Fan Clutch

This Flat Wrench is used along with our 3212 Pin Spanner below to remove the viscous fan blade assembly from the serpentine belt pulley.
$15.00
Grid | List (1 to 14 of 14) « Prev | Next »

STAY UPDATED Join our mailing list and be the first to hear all about our updates and offers!