VW/Audi Tools

TDI Timing Belt Tools

Gas Engine Tools

Sockets, Drivers and Bits

Brake-Trans-Wheel-Driveshaft

Fuel Inj, Ignition, Electrical

Clutch and Flywheel

View as: Grid | List (1 to 50 of 95) « Prev | Next » Display:

BRAKE-DUET - Rear Brake Reset Tool COMBO with M14 Impact Bit

Save $5 with this COMBO. Great for MK5 and newer.

$51.00

Kit1 MNA3KIT5PC - A3/B4 Kit (Economy)

For changing the timing belt on TDI® Engine codes 1Z and AHU and many earlier diesels

$147.00

Kit1 Part BEWBHWKIT4PC - Timing Belt Tool Kit for PD TDIs with BEW and BHW Engines

Kit of 4 specialty tools for changing the timing belt on TDI® Engine codes BEW and BHW.

$75.00

Kit1 Part CRAILKIT5PC - Timing Belt Tool Kit for Common Rail TDI engines CBEA, CJAA, and CKRA

Kit of 5 specialty tools for changing the timing belt on common rail TDI® Engines with codes CBEA, CJAA, and CKRA.

$164.00

Kit1 Part CVCA_CRUA_KIT - Timing Belt Tool Kit for Common Rail TDI engines CVCA & CRUA

Kit of 5 specialty tools for changing the timing belt on 2015-2016 common rail TDI® Engines with codes CVCA & CRUA.

$200.00

Kit1 Part MN10PC - 10 PC Triple Square Bit Set in Blow-Molded Case M4-M18

Popular set of 10 different triple-square bits for popular VW®/Audi® applications.

$35.00

Kit1 Part MNA4KIT7PC - A4/NB Timing Belt Tool Kit

7 specialty tools for changing the timing belt on TDI® Engine codes ALH. Chassis include all 1999.5-2003 Golf®/Jetta® (A4) or MK-IV and all New Beetle® TDI® to 2003.

$238.00

Kit1 Part MNT044 - Flywheel Lock Tool T10044

This handy tool holds the flywheel from rotating when removing and installing flywheel and clutch bolts.

$29.00

Kit1 Strut Tool Trifecta for MK5 and later

Save $5 with this set of 3 essential tools for changing the front struts on your MK5 and later Golf®, Jetta® and Beetle®.

$71.00

Kit2 MNA3DELUXE - A3/B4 Kit (DELUXE)

Timing belt kit for engine codes 1Z and AHU with upgraded tensioner wrench.

$162.00

Kit2 Part CR_MASTER_KIT - Timing Belt Tool Kit ALL 2.0 liter CR TDI engines CBEA, CJAA, CKRA, CRUA & CVCA

Kit of 6 specialty tools for changing the timing belt on all 2.0 TDI® Engines(codes CBEA, CJAA, CKRA, CVCA, & CRUA)

$223.00

Kit2 Part MNA4KIT6LR - A4/NB Timing Belt Tool Kit with Long Reach Option

Kit of 6 specialty tools for changing the timing belt on TDI® Engine codes ALH while keeping the valvecover on.

$238.00

Kit2 Part MNKICK-4CYL – Aluminum Economy Grade 4cyl Crank Counterhold

This thick aluminum bar provides the rigid counterhold needed for safe removal and installation of the crank sprocket center bolt.

$63.00

Kit3 Part MNPROKIT9PC - Pro Kit for Rotary Injection TDI (1996-2003)

Complete kit of all 9 specialty tools for all North American TDI® from 1996 to 2003.

$268.00

Kit Part BRMKIT5PC - Timing Belt Tool Kit for PD TDIs with BRM Engines

Kit of 5 specialty tools for changing the TB on BRM TDI engines.

$133.00

MN3272 - Rear Brake Reset Tool

For rear brake jobs on many VWs® and some Audi® with rear disc brakes.

$49.00

Part CLUTCH-097 Clutch Alignment Tool #97

Clutch Alignment Tool #97

$10.00

Part CLUTCH-126 Clutch Alignment Tool #126

Clutch Alignment Tool #126

$10.00

SCRATCH-N-Dent MN3104 - Shifter Alignment Tool

SCRATCH-N-Dent CLEARANCE. This tool looks simple but it can save significant amounts of time aligning the shifter in car.

$6.00

Set2 Part MN3400 - Serrated Alternator Pulley Bit SET

This specialty compact bit set for removing the freewheeling pulley on most VW®/Audi® alternators from 1999.

$29.00

SubB Part MNXZ18 - M18 Triple Square Bit, Impact grade

For front strut and rear brake work on 2006 (MK5) and later chassis Jetta®, Golf®, Rabbit®, and newer applications.

$11.00

SubD MN2567 - Gear Box Drain Bit

This unusual tool is necessary for changing gear oil on many VW®, Audi® and Porsche® transmissions, differentials and all-wheel --drive components.

$25.00

SubD Part MN248200 - Double Offset Box Wrench 10 & 8 mm

Essential for ALH TDIs with Manual Transmission during a TB change.

$9.00

SubD Part MNYANK-6CYL-HUB Optional Hub - 6cyl for NuYank

Optional hub for NuYank for 6 cyl for use on 6 cyl gas engines with timing belt. CLEARANCE

$20.00

SubE MN15BT - Replacement Wrench for Brake Tool

For rear brake jobs on many VWs® and some Audi® with rear disc brakes.

$3.00

SubE MNDH24 - 24 mm 12 Point Socket, Impact Grade

This is the best method to rotate the engine during a V6 timing belt job and fits some front drive shaft center bolts.

$8.25

SubE Part MN227MX - 27mm 6 Point Socket, Impact Grade

This impact grade 27 mm 6 point socket is used to remove the drive shaft center bolt late model VW®/Audi®.

$8.00

SubE Part MNDH19 - 19 mm 12 Point Socket, Impact Grade

This is the best method to rotate the engine during a TB job.

$7.00

SubF Part MNM8LONG - A3/B4 TDI Harmonic Balancer Bolts

High strength harmonic balancer bolts for the 1Z and AHU engines.

$4.00

SubF Part MNXZ14 - M14 Triple Square Bit, Impact grade

For front strut and rear brake work on 2006 (MK5) and later chassis Jetta®, Golf®, Rabbit®, and newer applications. (See usage note)

$11.00

SubH MN0201 - Flange Puller for 020-series Transmissions (1984~1990)

This miniature spring compressor permits the removal of tranny output flanges and replacement of the oil seal.

$20.00

SubH MN3104 - Shifter Alignment Tool

This tool looks simple but it can save significant amounts of time aligning the shifter in car.

$12.00

SubH MN3242 - V6 & V8 Crank Locking Pin

Crank locking pin for installing the timing belt on some V6 VW®/Audi®cars with 2 valve V6 and 5 valve engines and the 4.2 liter V8.

$15.00

SubH MN3268 - VR6® Cam Locking Plate (12 valve only)

Precision machined to lock the cams at TDC. VR6® engines with 12 valves only.

$28.00

SubH MN3277 - VR6 Spark Plug Boot Puller

This specialty tool is for removing spark plug boots on all VW®/Audi® VR6 engines. Replaces VW® tools 3277 and T10029.

$39.00

SubH MNSH32 - Oil Filter Housing Socket for Common Rail TDI

This compact 32 mm socket is used to remove the oil filter housings on TDI Diesels with engine code BRM, CBEA, CJAA,CKRA, CVCA, CRUA, CATA, CNRP and CPNB

$10.00

SubH MNT115 - 1.9 and 2.0 PD Tensioner Holding Pin- Triangle Handle (2004-2006)

This tool locks the timing belt tensioner in the retracted position.

$5.00

SubH Part 3366 - Chain Tensioner Gasket Tool

The most efficient way to change the troublesome cam adjuster seal on Audi® and Volkswagen® 4, 6 (2.7 and 2.8) and 8 Cyl With 5 Valve per Cylinder.

$25.00

SubH Part ALT-UP-KIT - Update Kit for Our Older MN3400 - 2 pc. UPDATE KIT Only!

If you already own an older-style Metalnerd® brand MN3400 like that shown in the photo, we have an update kit available.

$10.00

SubH Part CVPL - 2-Way CV Boot Crimp Pliers

These high-quality pliers are an effective, yet economical means to crimp "ear" type CV boot clamps from 2 different angles.

$20.00

SubH Part MN0812 - 3 piece Triple Square Bit Set

Set includes one 8 mm x 55 mm overall length and 10 and 12 mm that are 140 mm overall length.

$28.00

SubH Part MN1111 - Economy Tensioner Wrench

This basic tensioner spanner will fit most pre 1999 VW®/Audi® timing belt tensioners (gas or diesel).

$24.00

SubH Part MN12WH - M12 Wheel Assist Tool for 4 Lug Wheels

CLEARANCE (was $10). This handy tool is a real help when hanging or removing wheels on cars that use M12 wheel bolts. This includes most 4 lug wheels on VW® & Audi® cars.

$5.00

SubH Part MN14WH - M14 Wheel Assist Tool for 5 Lug Wheels

This handy tool is a real help when hanging or removing wheels on cars that use M14 wheel bolts. This includes most 5 lug wheels on VW® & Audi® cars.

$10.00

SubH Part MN2064 - A3/B4 Pump Pin

Pin for locking the injection pump on TDI® Engine codes 1Z and AHU and many earlier diesels

$15.00

SubH Part MN2122 - Specialty Double 21 & 22 mm Strut Nut Sockets

This tool spreads and holds the lower strut clamp open when removing the front struts starting with the MK4 (~1999) Golf®, Jetta® and New Beetle®.

$50.00

SubH Part MN2222 - 2-Arm Sprocket Puller

2-arm Puller for V6 Gas TB changes but not TDI. Utilized for on TDIs and earlier diesels for special procedures only.

$59.00

SubH Part MN3034 - A3/B4 Crank Lock

Gently holds the crank sprocket at TDC when you wrap the new belt on.

$15.00

SubH Part MN3036 - Universal Sprocket Buster (TM) Counterhold Tool

Used to hold the cam sprocket during cam bolt torquing (Early IDI and TDI) and is used when adjusting the cam sprocket hub bolts on later TDI® engines.

$58.00

SubH Part MN3333 - DELUXE Tensioner Wrench

This beauty will fit inside the motor mount and allow nearly 360° access to your timing belt tensioner.(gas or diesel with 2 pin holes)

$39.00

View as: Grid | List (1 to 50 of 95) « Prev | Next » Display:

STAY UPDATED Join our mailing list and be the first to hear all about our updates and offers!